11 Jun 2018

What is Reverse Osmosis?

Water Treatment Comments Off on What is Reverse Osmosis?

Reverse Osmosis – What Is It?


Chances are you’ve heard of reverse osmosis (or R.O. for short). There’s also a good chance you have no idea what R.O. is or how it works. Thankfully, C&J Water Treatment Co. of Indianapolis is here to break it all down for you!


What Reverse Osmosis Does


R.O. systems filter water – they just do a better job at it than many other water filtration systems, especially when it comes to removing most inorganic materials, such as salt, chlorine, heavy metals, pesticides, nitrates, etc. That is what makes reverse osmosis so effective for homes with brackish water or where fertilizers and other agricultural runoff can affect the local drinking water supply.


How Reverse Osmosis Works


R.O. systems force water at high pressure through a very fine membrane, which allows water molecules to squeeze through but not much else. On the clean side of the membrane, the system collects the clean water and sends it to your tap. On the “dirty” side of the membrane, the system automatically flushes the collected contaminants down your drain.


Most R.O. systems actually involve several filtration stages, including a pre-filter stage that removes heavier materials such as sediment and turbidity, a carbon stage that removes chemicals which may damage the membrane, a post-filter stage that helps remove tastes and odors, and a remineralization stage that adds healthy minerals such as calcium and magnesium back into your drinking water while also balancing its pH.


Pros & Cons of Reverse Osmosis


Some of the pros to R.O. filtration include higher quality, safer, and better tasting tap water. They are also more efficient at removing contaminants than many other systems on the market today. R.O. systems are low maintenance and do not rely on electricity, so even if your home loses power your drinking water won’t suffer. They are also user-friendly and don’t require a lot of moving parts or take up a lot of space.


One of the biggest cons of R.O. is the wastewater they tend to produce. Some dirty water remains on one side of the membrane, and this water is typically sent down the drain. However, there are pumps and other add-on components that can help minimize or completely eliminate wasted water. If you are interested in learning more about these systems and the various options available for your home, contact the team at C&J Water Treatment.


Why You Should Consider Reverse Osmosis at Home


If your household wants to eliminate odors and contaminants from your water supply, and you want the highest quality, “better than the bottle” drinking water available, then reverse osmosis might be for you. Even if you rely on treated municipal water instead of a well, you never fully know what comes out of your tap. A home R.O. system adds an additional strong layer of security and is guaranteed to remove lead, fluoride, and other components that sometimes make it through the citywide water treatment process.


Compare a reverse osmosis system with your home’s current water filtration system and find out which one works best for you and your family. Talk to C&J Water Treatment Co. in Indianapolis to get started!

07 Mar 2018

Anatomy of a Water Well

Water Well Anatomy Comments Off on Anatomy of a Water Well


You turn on your tap; water flows out. When it comes to wells, we don’t give them much thought. Let’s look beyond that bit of pipe that sticks out of the ground and dive deep into the anatomy of your water well.



Well Head

That pipe we just mentioned is called the well head. This is the very top of a well, consisting of the tip of a long pipe constructed of weather-resistant material (typically PVC). A well expert such as C&J Well Company will access the well head to reach many of the other system components. When not in use, a secure cap fits over the head to keep out debris and protect the electrical wiring that powers the pump.

Well Casing

The length of pipe itself is called a casing. This long pipe is usually also made of durable PVC, which doesn’t corrode like metal casings that used to be standard decades ago. Water rises into the casing up to the pump, which then transports the water into your home. C&J Well Company uses a specially designed pressure grout to coat the casing, providing increased strength and better protection of well components. We also dig wells into natural underground gravel beds to promote efficient water flow, which helps form aquifers for constant water sources.

Well Pump

If your water well was a living creature, the pump would be its heart. This is the main and most important component of the entire system. The submersible well pump uses electricity to draw water from an underground aquifer and send it through plumbing pipes to fixtures in and around your home. Although well pumps are designed to provide many years of trouble-free service, their streamlined design allows for easy removal from and reinsertion into the casing in the event of maintenance or repairs, by an experienced well pro such as C&J Well Company.

Well Screen

At the very bottom of the casing, below the pump and above a specialized sand media, sits the well screen. Just like the filter in your coffee pot, this screen filters out tiny bits of debris from your water source thanks to its stainless steel design, while the sand traps even smaller particulates. This provides increased protection of the well pump and other vital well components. C&J Well suggests having your screen cleaned at regular intervals. We can accomplish this task quickly and efficiently, using a combination of highly pressurized water and other techniques to blast any accumulated debris out of your well without damaging its parts.

Protecting & Maintaining Your Well

Whether you need a new well dug and installed, scheduled maintenance of an existing well, or repairs or replacement parts, count on C&J Well Company. From top to bottom, inside and out, we are your go-to Central Indiana water well team!

14 Feb 2018

How “Well” Do You Know Your Water Pump System?

Water Treatment, Water Well Anatomy Comments Off on How “Well” Do You Know Your Water Pump System?

When it comes to water wells, do you think pumps are pretty much the same? Well, think again.water well pump system

Constant Pressure vs. Standard or Conventional Pressure

There are some big differences between two of the well pump systems commonly found on today’s market. In fact, one of these systems was on yesterday’s market, due to the fact its technology has been around for more than 50 years.

One of the questions new water well customers ask us the most goes something like this:

“Hey there C&J Well Company, should I get a constant pressure or a standard pressure pump system?”

This is a great question, and one we really love to answer! It’s also a very important question, and depends on a lot of factors like home size, family size, budget, and your water consumption demand.

Constant pressure and standard pressure systems both do the same thing, and that’s move water from your well into and throughout your home’s plumbing. However, they do this in different ways. With constant pressure, the system closely monitors your home’s water pressure and adjusts your pump accordingly. Say you are taking a shower – the system will speed up or slow down your pump if it senses a second shower, or a washing machine, or a lawn sprinkler turn on or off, for example.

With a standard pressure system, there is no speeding up or slowing down. It simply turns on or turns off your pump depending on changes to water pressure at home. These hard starts and stops are less gentle on your pump, but standard pressure systems can help conserve a bit more water over the life of the system.

Benefits of Constant Pressure Over Standard/Conventional Pressure

Go for a ride through Indiana’s countryside and you might notice one or more larger tanks next to some of the homes. These big 100+ gallon tanks usually mean the home is equipped with a standard pressure system. There is nothing wrong with this type of system – it simply isn’t the most efficient system on today’s market. When you upgrade to a constant pressure system, you actually decrease your tank size. You may even decrease the amount of tanks you need. A constant pressure system utilizes a tank not much larger than a standard propane tank for your gas grill. This means it takes up much less space on your property.

Another benefit to a constant pressure system can be found right there in its name. These systems automatically turn on or adjust the speed of your pump when a sensor detects a drop of just a few PSI. Compare this with a standard pressure system, which typically activates the pump only after a drop of 20 or more PSI. Thanks to greater precision in constant pressure systems, you won’t experience as much fluctuation in your home’s water pressure as you might remember with older systems. Talk about enjoying city water without the city water bill! As a bonus, due to fewer fluctuations in PSI and the ability to adjust the pump, constant pressure systems usually require fewer pump startups and stops. This can greatly reduce the wear and tear on your pump, extending its service life while cutting down on maintenance costs.

Ready to add or upgrade to a well pump system that takes up less space while delivering water pressure similar to what you’d find in the city? Get in touch with C&J Well Company of Indianapolis! We’re happy to answer all of your questions about constant pressure and standard pressure systems. When you contact us, be sure to also ask about our special seasonal offers going on right now. You can save up to several hundred dollars and even take home some water treatment equipment for free with select purchases.

Ride the wave of water well future – upgrade to a constant pressure system today!

02 Jan 2018

Benefits of Installing a Home Water Well

Uncategorized Comments Off on Benefits of Installing a Home Water Well

At C&J Well Company of Indianapolis, water is our bread and butter. We know a thing or two about it, and we want you to know just how much better well water is than that treated City stuff.

So keep reading for a list of our three favorite benefits of your own private water well.

Water Well Benefits

1) The Price Sure Is Right

Hate having a water bill? Well, guess what? Well water is free! After the initial costs of installing your private water well and equipment, you can kiss those pesky municipal bills goodbye. Add up your family’s average monthly bills, and you can really get a sense of how much you’ll save in the long run.

Like any home appliance, there are some maintenance costs associated with keeping your water well pump running smoothly, but as long as you follow routine maintenance with the help of C&J Well Company, those costs will be minimal and few and far between.

2) Reliability and Durability

Speaking of routine maintenance, that’s another one of our favorite benefits of private water wells. The systems are surprisingly reliable and resilient, and they are built to last. High-quality well pumps, like the Grundfos line sold and serviced by C&J Well Company, will run smoothly for 10, 15, or even 20 or more years with minimal routine maintenance.

Forget boil water advisories, water main breaks, municipal treatment plant accidents, and other water quality issues that are out of your hands – with a private water well, your fresh water source is as close to home as it gets, instead of way over on the other side of town and through miles upon miles of aging infrastructure. Talk about buying local!

3) Cheers to Your Health

We’re not knocking municipal drinking water, which is a safe and proven source of potable water for millions of Indiana families. However, to make that water safe, local water departments rely on a variety of controversial chemicals and other harsh treatment methods. From caustic and chlorine, to heavy filters and even fluoride, there’s quite a bit of stuff that goes into your typical glass of water to take all the bad stuff out. And sometimes the bad stuff still makes it through.

One of the side effects to public water treatment is the removal of many healthy, naturally occuring minerals. Not with well water. Thanks to natural filtration in the earth, well water tends to taste better, feel better, and is better for you. If you still want a bit more peace of mind, C&J Well Company offers a variety of filtration and water quality systems to accompany your private well.

Well water really gives you and your family the best of all worlds. It’s affordable, it’s reliable, it’s healthy, and it’s all yours. To learn more about the many benefits of having your own water well, contact the local water well pros at C&J Well Company of Indianapolis. Whether you have a thousand-acre farm in the country or a half-acre homestead in the heart of the city, we have a water well solution designed just for you. Cheers!

01 Dec 2017

Do You Know How to Properly Maintain a Water Well?

Well Maintenance Comments Off on Do You Know How to Properly Maintain a Water Well?

One of the greatest things about water wells – besides the water itself – is that they are typically pretty hassle-free. If you want to squeeze every last drop out of your well’s performance, follow these expert tips from C&J Well Company of Indianapolis.

Maintain Your Water Well

Do This: Homework

As a water well owner, you want to make sure you know how your well works, understand its components, and recognize the warning signs when something isn’t working the way it should. You don’t need to be a licensed pro like us to do this. Instead, think of your home’s water well like your car – you know when to fill the gas tank, when to change the oil, and when to replace the tires, even if you’re not a mechanic. A well requires the same basic understanding and commitment.

Do This: Preventative Measures

As we mentioned above, oil changes are one of the simplest and effective ways to keep your car on the road. Likewise, some simple preventative steps will keep your well pumping clean drinking water into your home.

Once a year, have your water well properly disinfected. You can disinfect your well or have an expert such as C&J Well Company do it for you. This will help prevent and eliminate harmful bacteria.

Every two to three years, have your well and pump system routinely inspected. This process usually takes only a few hours to complete, and can identify wear & tear and other potential issues before they turn into major problems.

Do This: Hire a Qualified Well Expert

Here’s one area you don’t want to skimp on, or rely on sites like Craigslist to find a “pro.” For all of your home’s water well and well treatment needs, insist on a licensed, experienced, and proven professional. C&J Well Company has been serving the greater Indianapolis area and central Indiana for years. Contact the Better Business Bureau, ask around, browse our social media pages, and read our real customer reviews (we never pay for reviews) … you’ll find we’re an honest, friendly, and affordable family company committed to you. Don’t count on a fly-by-night handyman who charges up front. Insist on the best. That’s C&J.

Don’t Do This: Self-Service

We appreciate all you handymen and handywomen out there, but water well service can be a big challenge for even the most seasoned DIYer. That’s why you shouldn’t try to tackle major well maintenance just to save a few bucks – it can end up costing you quite a bit more down the road. Remember, this is your family’s drinking water we’re talking about! Let the well experts at C&J do the hard work for you, because wells and water treatment are all we do.

Don’t Do this: Ignore the Problem

You can probably lump this tip into the preventative measures paragraph above, but when it comes to maintaining your water well, don’t ignore issues no matter how minor they may seem. Cloudy or smelly drinking water; low or slow water pressure; odd sounds when you turn on your tap – all of these annoyances, while rare with well water systems, point to something wrong. You know what folks say about an ounce of prevention. So make sure you respond quickly when something just seems “off” about your home’s well or water.

Along those same lines, please don’t ever hesitate to give C&J Well Company a call. We’re here to help you 24/7/365. Get in touch with our friendly team today. Sometimes, we can diagnose an issue via phone call or email. If it takes a house call, we’re happy to do that and can typically complete your maintenance or repair service in a single visit.

Water wells are simple systems. For all of your questions, turn to C&J Well Company of Indianapolis for the answer.

31 Oct 2017

Geothermal Well Drilling: How Does It Work?

C&J Well Company, Water Treatment, Well Drilling Comments Off on Geothermal Well Drilling: How Does It Work?

Water wells are pretty straightforward. You dig a hole in the ground to reach the water table beneath, add a pump and some pipes, and voilà – there you have it. Granted, there is a bit more work involved, but at C&J Well Company of Indianapolis, digging water wells is similar to digging geothermal wells. So why all the confusion over the latter? Let’s “dig in” a bit more, shall we?

Geothermal Drilling | C&J

What Does Geothermal Mean?

Geothermal heating and cooling means using the earth’s natural and consistent temperature right under the ground to heat and cool your home. The idea is the same for heating and cooling energy, but since it’s late autumn we’ll focus on heating. With geothermal, you don’t “make” heat … you move it. The earth’s crust temperature is about 55 degrees, 365 days a year. We might have a foot of snow on the ground during winters here in Indiana, but just a few feet below our feet, the earth is still 55 degrees. Geothermal heating harnesses that temperature and moves it into and through your home.

What Are the Benefits of Geothermal?

There are several ways geothermal heating and cooling systems top their traditional HVAC alternatives. Geothermal is eco-friendly – since you are harnessing the earth’s natural energy, there is no need to burn fuel. Geothermal systems are affordable and often cost less than natural gas or heating oil to operate. They are also quiet, efficient, reliable, and low-maintenance.

How Does Geothermal Work?

Moving that heat takes a few pieces of equipment in what’s called a “loop.” With geothermal heating, there are two common types of loops – open and closed. An open loop system relies on two wells, one supply well and one return well, and circulates water via pipes between the two. In a closed loop system, a water solution is always in the pipes (think lava lamp), and is circulated through your home’s ventilation.

Where Should I Dig My Geothermal Well?

Great question. That’s where C&J Well Company comes in. No matter the type, size, or scope of your geothermal heating and cooling needs, we can help. Live in the country, suburbs, or busy city? No problem! We dig geothermal wells using the same techniques and equipment for standard drinking water wells. Count on our experience and expertise to choose the best spots on your property to dig and set up geothermal wells. Once your well is ready go, you can harness the power of geothermal energy to heat and cool your home, generate power, and even heat your home’s water and your hot tub, too!

How Can I Learn More?

C&J Well is your central Indiana expert in everything geothermal. From geothermal well digging, to heating and cooling system installation and maintenance, we do it all! Contact a team member today for a no-hassle analysis of your geothermal needs.

Winter’s right around the corner. Are you tired of dealing with an outdated or poorly performing HVAC system? Make the switch to geothermal heating and cooling today.

20 Sep 2017

Common Types Of Home Water Treatments

C&J Well Company, Water Treatment Comments Off on Common Types Of Home Water Treatments

When it comes to home tap water treatment, there are about as many options as there are brands of bottled water. In other words – a lot! C&J Well Water in Indianapolis is here to help you choose the right kind of water treatment for your home and, more importantly, your family.Common Home Water Treatments

Water Filtration Systems

Just as the name implies, this water treatment option uses special filters to remove impurities in water. It’s one of the most popular types of treatment on the market today. Why? Because water filters are generally affordable and because they work.

Filters themselves come in many shapes and sizes. From handheld bottles and pitchers you store in your fridge, to kitchen faucet-mounted and even whole-house systems, there’s a water filter designed for your particular needs. The media found in filters ranges from natural elements including activated carbon and sand, to chemicals such as potassium permanganate, and more advanced setups that rely on ion exchange. Depending on the size and type of filter you want, prices start at a few bucks and can increase to thousands of dollars.

Water Disinfection

Sometimes, tiny microorganisms can still find their way through even the toughest filters. Unfortunately, many of these invisible organisms – including e-coli and cryptosporidium – pack a big gut punch.That’s where water disinfection enters. Using physical or chemical processes, or a combination of both, disinfection systems kill any pathogens in the water supply. Ultraviolet or UV lighting uses the same type of rays found in our sun to disrupt the microscopic bugs’ DNA, rendering them harmless. On the chemical side, chlorine and ozone are often used to kill them in their tracks.

Water Softeners

Ever heard of hard or soft water? That’s what we’re talking about here. Hard water has all kinds of problems associated with it. These range from causing dry skin, lessening the cleaning power of your dishwasher and washing machine, and promoting excess calcium buildup on your water-using appliances. Like water filtration, water softeners are pretty self-explanatory: they reduce the hardness of your home’s tap water. In many softening systems, “soft” sodium or potassium replaces the naturally occurring “hard” calcium and magnesium, which leaves your water actually feeling softer and tasting better. Read more about the many benefits of soft water. Water softeners are long-lasting, low-maintenance systems that can pay for themselves over time by reducing the wear and tear on your home’s other essential appliances.

The list doesn’t stop here. Other common home water treatment options include reverse osmosis (RO), distillation, and a good old-fashioned water well cleaning. Not sure which treatment systems are right for you? C&J Well Company offers them all! Not only do we sell the parts and accessories you need to get started and maintain your home water treatment system, we also install, service, and replace outdated systems. Contact a member of our Indianapolis team and we’ll be happy to provide you honest, trustworthy, and hassle-free advice without the added pressure to buy something.

Overall in Indiana, we’re lucky to have safe public and private water supplies across the state, but as the old saying goes … it’s always better to be safe than sorry. Add safety to your home’s water and your family’s health. Talk to C&J Well Company today!

31 Aug 2017

4 Signs Your Well Needs to Be Cleaned or Replaced

Well Maintenance, Well Water Problems Comments Off on 4 Signs Your Well Needs to Be Cleaned or Replaced

Your well water system should be treated like any home appliance, it requires regular maintenance and monitoring. Finding a trusted well service company is essential to ensuring you’ll always have a fresh, clean water supply. However, when your well has unexpected signs of malfunction, it’s important to act quickly. Here are four common indicators that your well water system needs to be cleaned or replaced.

Well Water Systems

Sputtering Faucets

A sputtering faucet is an indication that there might be a damaged seal or malfunctioning pump. Keeping up regular maintenance can avoid issues like these, as they can be caused by build-up in your well. Replacing the well might be necessary if the pump is irreparable, but your well service provider can properly assess the situation.

Higher Electric Bill

This can be due to your well pump working overtime due to sediment build-up. Often times a proper cleaning done by a professional well service provider can fix this problem, and your electric bill will return to normal. However, if your well equipment is worn down due to lack of attention to this type of problem for a few months it may need to be replaced.

Water Isn’t Clear

Anything out of the norm is a cause for concern. If you are finding your water to be white and cloudy or yellowed, it could be time for a cleaning to flush out the organic and inorganic particle build-up in your well. A reddish brown is also a reason to schedule a cleaning, as your well probably needs to be bleached to take care of the extra iron and manganese in your water. The most alarming sign is if your water has a blue-green hue, as this indicates copper pipe corrosion. If the pipes are too far corroded it might be time for a new well system!

Low Water Pressure

Water pressure change is something well owners should always be aware of. If you notice a change in your pressure, even slight, check your pump’s psi gauge. If your gauge is showing under 20psi, it’s time to call your well service provider. If it’s an older well, replacement is probably the best option.

If one or more of these issues are happening with your own well, it’s in your best interest to call your well service provider immediately. Your water supply can have a significant impact on your health and wellness, so don’t ignore these signs of improper well function! Contact us at C&J Well Co. today to hear about the well services we offer.

02 Aug 2017

Choosing the Right Water Treatment Methods For Your Home

Water Treatment Comments Off on Choosing the Right Water Treatment Methods For Your Home

Living in a city in the U.S., it can be easy to assume that the water that comes from your kitchen or bathroom faucet is safe to drink. Unfortunately for many, that assumption may be false. Without utilizing water treatment methods, Americans may be putting their health and the health of their family at risk.

Do you want to know how to choose the best water treatment methods for your family? This guide will tell you what to know about picking the right product.

Choosing the right home water treatment methods

In 2016, Harvard released the results of a study on water quality in the U.S. Over the previous three years, they tested more than 36,000 water samples. The results showed that water supplies in 33 states, supplying water to more than 6 million Americans, had unsafe levels of polyfluoroalkyl and perfluoroalkyl substances.

These substances are known to cause cancer, increase the risk for obesity and high cholesterol, among other health issues. Although the study focused only on these two chemicals, other dangerous substances have been found in water supplies across the country.

Even if the municipal water supply in your city is clean and safe, accidents can still occur. Water main breaks, toxic spills, and power outages can all affect water quality.

If you rely on well water rather than a municipal water supply, you may still be in danger.

But by utilizing water treatment methods, Americans can make their municipal or well water supply safe for drinking and anything else you’d like to use it for.

Water treatment methods

There are several different water treatment methods that you can use to protect your family’s water supply.

To choose the right option for your home, you need to test your water to determine what kinds of minerals, chemicals, or other substances are present. That way you can choose the right treatment to remove those substances.

Once you’ve analyzed your water, check out the following water treatment methods to choose the right one for you.

Water Softener Systems

If a test of your home’s water reveals high levels of metal cations a water softener system may be the best option.

This system will reduce the levels of magnesium, calcium, and other metals. While these substances are often safe to drink, they can affect the taste of your water.

Reverse Osmosis

Harsher substances like copper, aluminum, chlorides, and sulfates do more than just affect the taste of your water. In high levels, they can cause a range of health problems.

Reduce the risk to your health by utilizing reverse osmosis to reduce the levels of dissolved solids in your water.

Well Cleaning

If you get your water from a well, it’s essential to clean it every 5 to 10 years, to reduce a build up of harmful sediment and debris.

Ultraviolet Disinfection

Some substances in water can quickly make you dangerously ill. Kills dangerous bacteria like E-coli and chloroform before it gets the chance, with ultraviolet disinfection.


If your water test reveals sand, sediment, or iron, a filter can help reduce their presence.

Choosing the right water treatment for your home

Whether you’ve chosen the right water treatment methods for your home, or you’re still searching, WellCo can help.

WellCo provides effective water treatment methods to Indianapolis residents, helping to improve their water’s quality and taste.

We even offer a free water quality test, to help you learn what’s lurking in your water.

Contact us today to schedule yours, and start protecting your family’s health today!

13 Jun 2017

Does Your Well Water Need to be Treated?

C&J Well Company, Water Treatment, Well Water Problems Comments Off on Does Your Well Water Need to be Treated?

Having your own water well is a wonderful thing. These systems are low-maintenance and nearly hassle-free. One of the easiest ways to keep your well producing fresh, clean, healthy water is to keep an eye on the quality of that water itself, and treat it as necessary.

Your well water might need treated! Check out the warning signs:

Rain and Runoff

This time of year can be problematic for water wells for two big reasons – it’s rainy season and growing season. In wet weather, that water has to run somewhere. As it follows gravity downward, water collects debris along the way. If your well is in its way, all that stuff can wind up in your water supply. This includes agricultural runoff, such as farm pesticides and livestock waste.

From reverse osmosis systems to specialized filters, there are a variety of options available today to remove contaminants from your well water. Chlorinating your well is a popular and recommended DIY solution for water of questionable quality. Check out this handy how-to guide for chlorinating your water well.

Salt and Sediment

Love ‘em and hate ‘em. Those salt trucks and plows do a great job across our state during rough Indiana winters. However, when temperatures rise and grounds thaw, all that leftover salt, sand, and sediment doesn’t just disappear.

Excess salt is common occurrence when talking about well water quality issues. There are plenty of ways to test for salt and sediment in your well water supply, but if your water tastes salty or looks cloudy, it’s time for a water treatment regimen. Consider having your water professionally tested. Also, be sure to see the section above for DIY well chlorination, or talk to C&J Well Company in Indianapolis about more permanent treatment solutions.

Seasonal Smells

Your well water may look crystal clear and taste normal, but you still pick up a faint whiff of something odorous every time you turn on the tap. Does this sound – or smell – familiar? Our noses are pretty powerful, and can detect even faint traces of sulfur, algae, and other earthy/musty aromas. To combat these usually harmless odors, drop a fresh slice of lemon into your glass of water. You can also fill a pitcher and place it in the fridge for a couple hours before drinking. Or, use a carbon-based filter.

If the smells are just too offensive, give C&J Well a call and ask us about other ways to eliminate water odors for good.

Other Solutions to Protect Your Well Water

Making sure your well is installed on higher ground is key – the higher elevation, the better. It’s also a smart idea to install your well far away from your home’s septic system if you have one. Purchased your property with a water well already installed? Consider relocating your existing well to a better spot on your property. There are also a number of mechanical systems that protect well water and further treat it before it reaches your taps.

C&J Well Company is your one-stop well shop, and we offer these and many other products and services. All are designed with ultimate well performance, efficiency, and safety in mind. Browse our website, contact us, or schedule a no-obligation meeting to learn more.

We all love well water, and taking simple steps like those outlined above go a long way to protecting your home’s water and your family’s health.

*Loans provided by EnerBank USA, Member FDIC, (1245 Brickyard Rd., Suite 600, Salt Lake City, UT 84106) on approved credit, for a limited time. Repayment term is 60 months. 6.99% fixed APR. Minimum loan amounts apply. The first monthly payment will be due 30 days after the loan closes.
*Loans provided by EnerBank USA, Member FDIC, (1245 Brickyard Rd., Suite 600, Salt Lake City, UT 84106) on approved credit, for a limited time. Repayment terms vary from 24 to 132 months. Interest waived if repaid in 365 days. 18.58% fixed APR, effective as of January 1, 2019, subject to change. Interest starts accruing when the loan closes.
*Loans provided by EnerBank USA, Member FDIC, (1245 Brickyard Rd., Suite 600, Salt Lake City, UT 84106) on approved credit, for a limited time. Repayment terms vary from 12 to 144 months depending on loan amount. 8.99% to 12.99% fixed APR, based on creditworthiness, subject to change. The first monthly payment will be due 30 days from the date of application and monthly thereafter.